top of page

Build a Plate 11 Pinhead from the Kit

I'm still updating this series.
Don't miss the next new video.
Subscribe to stay updated!

E1 Getting Started - Finding Parts in Your Rough Stock
07:17
Prepping Stock Without A Tablesaw
03:55
E2 Prepare and Glue the Rail Assembly
34:54
E3 Lay Out and Shape the Rear Legs
10:44
E4 Shave Horse Base - Prep and Drill the Rail Assembly
19:14
E5 Shave Horse Base - Cut the Dados and the Trim the Tops of the Legs
17:26
E6 Shave Horse Base - Drill and Mount the Legs
18:41
E7 Make the Stage Center
22:22
E8 Prepare the Sides and Glue the Stage Together
10:34
E9 Complete the Stage Sides and Start the Stage Top
12:03
E10 Prepare the Stage Top and Glue on the Suede
14:09
E11 Complete the Stage Assembly
17:35
E12 - Cut the Swing Arm to Shape
07:32
E13 - Cut the Tenon on the Top of the Swing Arm
14:24
E14 - Chop the Mortise for the Head Wedge
14:00
E15 - Install the Height Adjuster
07:31
E16 - Make the Clamping Pin
13:18
E17 - Cut the Swing Arm Mortise in the Head
20:09
E18 - Make and Fit the Head Wedge
08:38
E19 - Prepare the Head for the Clamping Pin
14:56
E20 - Make and Install the Pin Keepers
23:15
E21 - Make the Limiting Pin
03:02
E22 - Complete the Head
06:09
E23 - Prepare the Treadle Stock for a Glued-In Mortise
03:00
E24 - Layout and Cut the Treadle Parts
08:18
E25 - Glue-up the Treadle with Henry
04:06
E26 - Complete the Treadle
10:07
  • Instagram

©2023 by the Joint Effort.

bottom of page